DW 5100 Round Seat Drum Throne with Oversized Locking Nut
The 5100 is a drum throne with a 13 in round seat on a 3 in cushion, adjustable from 21 to 28 in high. A throne is not judged by its cushion but by what happens once you stop thinking about it: here, a threaded spindle locked by an oversized nut, and a double-braced tripod base that does not wobble.
What sets it apart
- 13 in round seat, 3 in thick cushion
- Threaded spindle height adjustment, from 21 to 28 in
- Oversized locking nut, firm hand tightening
- Moulded vise mount under the seat
- Double-braced tripod base, 1 1/8 in tubing
- Wide-footprint non-slip feet
Why a round seat rather than a saddle
A round seat lets your pelvis turn freely. You pivot toward the cymbals on the right, come back to the hi-hat, lean over the floor tom, and the seat never gets in the way.
It is the choice for mobile playing and wide kits. On the other hand, it supports the back of the thighs less than a moulded seat: a drummer who wants support will be better served by a saddle.
The threaded spindle and the nut that stays put
Thrones with a smooth post held by a locking screw all end up sinking slowly during the gig, because nothing resists the weight except friction.
Here, the height is carried by threads: the load rests on the threads, not on clamping pressure. The oversized nut then locks everything in place, and it is wide enough to turn by hand, without tools, even with tired fingers after a night of playing.
A height range that fits different builds
From 21 to 28 in, the range goes from the drummer who sits low, thighs almost horizontal, to the one perched high who likes to come down on the bass drum. Those seven inches cover nearly every adult height.
It is worth noting your height once you find it: on a threaded throne, you get it back by counting turns, which saves time at the next setup.
Specifications
| Seat | Round, 13 in diameter |
|---|---|
| Cushion thickness | 3 in |
| Height | 21 to 28 in |
| Adjustment | Threaded spindle and oversized locking nut |
| Seat-to-post connection | Moulded vise under the seat |
| Base | Double-braced tripod, 1 1/8 in tubing |
What it is for
- Drummers who pivot a lot on a wide kit
- Rehearsal and stage, with a setting that holds all night
- Studio, where the seat must not make a single creak
- Replacing a smooth-post throne that sinks while you play
- Shared rehearsal space, with a height you find again by counting turns
Compare with other manufacturers
Drum thrones from other manufacturers:
| Manufacturer | Comparable model | What differs |
|---|---|---|
| Roc-N-Soc | Nitro round seat | Gas shock instead of a threaded spindle |
| Tama | 1st Chair Round Rider | Screw-clamped post, firmer seat |
| Pearl | D-2500 round seat | Ratcheting height adjustment |
| Gibraltar | 9608 round seat | Four-leg base on some versions |
Frequently asked questions
- Round seat or saddle for a bad back?
- A saddle supports the pelvis more and often suits lower back pain better; a round seat allows more freedom to turn. Trying it remains the deciding factor, and drummers are divided.
- Does the throne height sink while you play?
- The weight rests on threads, not on clamping pressure: the slow sinking of smooth-post thrones does not apply here.
- How is the seat attached to the post?
- With a moulded vise mount fastened under the seat. It is a connection clamped onto the tube, not just a screw into the seat base.
- What drum throne height should a beginner start with?
- A good starting point: thighs sloping slightly down, knee a little lower than the hip, heel resting without tension.
Avis clients
Found your throne height? Share it with other drummers.
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.