DW DWSM375S True-Pitch Stainless Steel 4.375 in Bass Drum Tension Rods, 6-Pack
The DWSM375S is a set of six stainless steel drum tension rods for bass drums, 4.375 in long and cut to the True-Pitch thread of thirty threads per inch. You cannot hear stainless steel: you notice it after three years of basements, garages and damp stages.
What sets it apart
- Solid stainless steel, not a plating
- True-Pitch thread, thirty threads per inch
- 4.375 in (111.1 mm) long
- Six rods per pack
- For bass drums exposed to humidity or travel
Chrome or stainless: what the difference really costs
Chrome is a coating. As long as it is intact, it protects perfectly; the day a drum key scratches it or a knock chips it, the steel underneath is bare and rust starts from that point. On a tension rod, that point is almost always the same: the head, where the key presses.
Stainless steel has no coating to break through. A scratch does nothing to its resistance. That is why you choose it for an instrument that travels, sleeps in a basement or plays outdoors.
A clean thread, the key to consistent tuning
A corroded thread catches. The drummer compensates by forcing it, the key slips, and the tension applied no longer matches the rotation made. Tuning becomes a lottery, and you end up blaming the head.
Threads that stay clean year after year mean a tuning motion that stays true. On a bass drum, where you work very close to the point where the head just takes up its slack, that consistency is exactly what you are after.
Specifications
| Material | Solid stainless steel |
|---|---|
| Thread | True-Pitch 30, thirty threads per inch |
| Length | 4.375 in (111.1 mm) |
| Quantity | Six per pack |
| Use | Bass drum |
What it is for
- Touring bass drums exposed to temperature swings
- Instruments stored in a basement or a damp room
- A full set replaced on a restored drum
- Drummers who play outdoors in summer
- School kits that get rough treatment
Compare with other manufacturers
Stainless steel hardware from other drum manufacturers:
| Manufacturer | Comparable model | What differs |
|---|---|---|
| Pearl | Stainless hardware from its marine drums | Available on some lines only |
| Yamaha | Bass drum tension rods | Chrome as standard, no common stainless version |
| Gibraltar | Treated steel replacement rods | Surface treatment rather than solid stainless |
| Ludwig | Bass drum hardware | Vintage head profile and finish |
Frequently asked questions
- Can you tell the difference from chrome tension rods?
- A little: stainless steel has a slightly duller sheen. On a full set, everything matches; it is mixing the two on the same drum that shows.
- Is the thread the same as the chrome version?
- Yes. Same True-Pitch thread at thirty threads per inch, same 4.375 in length. Only the material changes.
- Can stainless steel tension rods still seize?
- They do not rust, but a dirty thread always catches. A cleaning and a touch of wax now and then keep the motion smooth.
- Is it worth it if my kit stays in the living room?
- Less so. Stainless steel really pays off once the instrument moves, travels or lives with humidity.
Avis clients
Have your tension rods started to pit?
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.