DW DWSM796 Dog Biscuit Clamp, 3/4 in, with L-Arm
The DWSM796 is an accessory clamp that closes around a 3/4 in tube and holds a 1/2 in rod. It is the clamp for light stands and thin tiers, where a jaw designed for a larger tube would just spin.
What sets it apart
- Closes around a 3/4 in tube
- Takes a 1/2 in rod
- Quick-release hinge: on and off in an instant
- 1/2 in to 9 mm L-arm adapter included
- Compact body, unobtrusive on the setup
The tube diameter decides, not the brand of the stand
A drum stand doesn't have one diameter: it has three or four, one per tier. The top tube is thin, the bottom one is thick. So choosing a clamp starts with choosing which tier it will go on.
This version is for 3/4 in, meaning the middle tiers and lighter-gauge stands. A larger jaw placed there would never close far enough to hold.
Quick release, designed for what gets moved often
An accessory clamp doesn't stay in one place for life. It follows the day's setup, moves up a tier, goes onto another stand. The quick-release hinge makes that move painless: open it, put it somewhere else, close it.
The included L-arm adapter widens the range further: it steps down from 1/2 in to 9 mm, which covers the thinner rods of hand percussion and small accessories.
Specifications
| Mounting tube | 3/4 in |
|---|---|
| Rod accepted | 1/2 in |
| Closure | Quick-release hinge |
| Included | 1/2 in to 9 mm L-arm adapter |
What it is for
- Mounting an accessory on a lightweight cymbal stand
- Adding hand percussion on a thin tier
- Holding small gear on an existing setup
- Setups that change from one song to the next
- Turning a snare stand into an accessory holder
Compare with other manufacturers
Small tube clamps from other manufacturers, and the diameters they work on:
| Manufacturer | Comparable model | What differs |
|---|---|---|
| Gibraltar | Hinged accessory clamp | Single diameter, no adapter included |
| Pearl | Rod clamp for thin tubes | Through-bolt closure |
| Tama | Compact accessory clamp | L-arm sold separately |
| Dixon | Thin-jaw clamp | Less secure grip on chrome tubing |
Frequently asked questions
- How do I know if my tube is 3/4 in?
- Measure the outside diameter exactly where the clamp will go. The same stand can go from 3/4 in to 1 in from one tier to the next.
- Is the L-arm included?
- Yes, with its adapter that steps down from 1/2 in to 9 mm for thinner rods.
- Can I put it on another brand's tube?
- Yes, if the diameter matches. The clamp doesn't read logos, only dimensions.
- Will it hold a cymbal?
- On a thin tube, the load it can take depends mostly on the stand itself. A small effects cymbal is fine; a heavy ride needs a sturdier anchor point.
Avis clients
Which tier of your stand do you want to hang your accessory on?
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.