DW SMRKC15K Drum Rack T-Clamp with Drum Key Screw
The SMRKC15K joins two 1.5 in drum rack tubes in a T, and it tightens with the drum key that is already in your pocket. That choice of hardware is no accident: it eliminates the tool nobody can ever find at setup time.
What sets it apart
- Joins two 1.5 in rack tubes in a T
- Drum key screw
- No extra tool to carry
- Fixed perpendicular angle, suited to structure
- Chrome finish
The tool you always have versus the one you are looking for
Every drummer carries a drum key: in a pocket, on the throne, hanging from the snare stand. It is the only tool guaranteed to be there, because you cannot tune without it.
Hardware with a drum key head takes advantage of that certainty. No hex key to dig out of the bottom of a case, no screwdriver borrowed from the tech. The clamp tightens with what you already have in hand, and it loosens the same way at teardown.
The T, and where it fits in a rack
A T-clamp does not close a corner: it grafts one bar onto the middle of another. It is the part that adds a branch where the structure already exists, without touching the corners.
That lets a rack grow through successive additions. You start with a simple shape, then add a bar for percussion, another for a second cymbal station, as the setup demands.
Tightening with a drum key, but how far
A drum key gives a short lever arm, which is a good thing: it naturally limits the torque you apply. On a rack part, that is a safeguard, because overtightening marks the tubes and makes teardown harder.
The useful reference is firm contact, without forcing. If the assembly still moves, it is almost always because the part is not positioned correctly, not because it needs more tightening.
Specifications
| Geometry | T-clamp, perpendicular |
|---|---|
| Tubes | 1.5 in on both sides |
| Hardware | Head takes a drum key |
| Part type | Structural clamp |
| Finish | Chrome |
What it is for
- Grafting a bar onto the middle of an existing rack
- Adding a branch for percussion
- Setting up a rack without carrying extra tools
- Fast assembly and teardown on tour
- Growing a structure through successive additions
Compare with other manufacturers
Rack T-clamps differ mainly in their hardware:
| Manufacturer | Their equivalent | Where it differs |
|---|---|---|
| Gibraltar | Rack T-clamps | Hex key screws on several lines |
| Pearl | Rack branch clamps | Clamping system specific to the brand |
| Tama | Perpendicular rack clamps | Tube diameters vary by line |
Frequently asked questions
- Do I need a special drum key?
- A standard drum key works. That is exactly the point of this hardware: it uses the tool every drummer already owns.
- How is it different from the 90-degree clamp?
- Geometry and tool. The T-clamp grafts one bar onto the middle of another; the 90-degree clamp closes a corner.
- Is it strong enough to hold toms?
- It is a structural part: it holds the bar, and it is the clamps mounted on that bar afterwards that carry the drums.
- Can I loosen it by hand?
- No, the head is designed for a key. That deliberate locking keeps a structural clamp from working loose while you play.
Avis clients
Do you often set up your rack in a hurry?
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.