DW SMTP50S6 True Pitch 50 Tension Rods for 6 in Snare Drum
This pack of twenty stainless steel drum tension rods is cut for a snare drum six inches deep. The length of a tension rod is not a packaging detail: it follows directly from the depth of the shell, and a rod of the wrong length is useless.
What sets it apart
- Sized for a snare drum six inches deep
- Fifty threads per inch
- Stainless steel
- Pack of twenty, receivers included
- Fine adjustment on the most sensitive drum in the kit
- Threading designed to hold tuning consistently
Shell depth decides rod length
A tension rod passes through the hoop, runs along the shell and threads into the lug. Its working length therefore depends on the height of the shell: a few millimetres too long and the rod bottoms out in the lug before the head is tensioned; a few millimetres too short and it does not engage enough threads.
That is why a set of rods is chosen by depth, not by diameter. A six-inch snare will not take the rods from a deeper drum, even if everything else is identical.
Why the snare gains the most from a fine pitch
The snare is the drum you adjust most often: depending on the room, the music, the head, the mood of the snare wires. Each adjustment is tiny and has to be reversible.
A fine thread makes those micro-adjustments possible. You go down an eighth of a turn, listen, and go back up if that was not it — a move that simply makes no sense with a coarse thread, where the same eighth of a turn shifts too much tension to hear what you were after.
An even head before precise tuning
No set of rods makes up for a badly seated head. Evenness comes first from method: tightening in a star pattern, equalizing tension over several passes, checking rod by rod at the same spot on the head.
What the fine pitch adds is the ability to finish the job. Once the head is even, it lets you go after the exact pitch instead of stopping at the closest setting the thread allowed.
Specifications
| Shell depth | Six inches |
|---|---|
| Threads per inch | Fifty |
| Metal | Stainless steel |
| Quantity supplied | Twenty rods with receivers |
| Drum | Snare drum |
What it is for
- Fitting out a snare drum six inches deep
- Fine-tuning between two rooms
- Replacing a worn or mismatched set of rods
- Getting reversible adjustments to an eighth of a turn
- Making a head more even from one lug to the next
Compare with other manufacturers
On the snare, replacement rods compare mainly by length and threading:
| Manufacturer | Their own solution | The difference |
|---|---|---|
| Tama | Snare drum tension rods | Standard threading on most lines |
| Pearl | Replacement tension rods | Lengths matched to the brand's own shells |
| Gibraltar | Universal tension rods | Broad compatibility, no dedicated fine pitch |
| Mapex | Original snare drum rods | Different heads and bases |
Frequently asked questions
- How do I measure the depth of my snare?
- Measure the height of the shell without the hoops or heads. That dimension decides the length of the rods, not the diameter.
- Can I put them on another brand's snare drum?
- They are designed for the manufacturer's original lugs. Elsewhere, check the lug threading and the available length.
- Do I need to replace the receivers too?
- They are included in the pack, so you can redo every rod and receiver pair rather than mixing generations.
- Twenty rods — isn't that too many for a snare?
- It is the count for a ten-lug drum fitted on both sides. On an eight-lug drum, you are left with spare rods.
Avis clients
Do you retune your snare in every room?
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.