Vater Power MV-B2PWR Marching Bass Drum Mallets — for 20 to 22 in Drums
The MV-B2PWR is a marching bass drum mallet for the 20 or 22 in drum, the second spot in the line. This drum is the tipping point: still small enough to follow fast figures, already big enough that a weak attack shows on a sustained note.
What sets it apart
- Sized for 20 to 22 in drums
- Power series shaft, 0.870 in at the grip
- Swells to 0.890 in just before the head
- Solid wood exactly where the rim strikes
- The middle of the five sizes in the Power series
- Same grip as the four other sizes in the series
The pivot drum of the line
Between the top drum that chops and the big drums that carry, the 20 or 22 in drum does both. It picks up part of the fast figures and starts to produce an audible sustained note. It is the drum where a poor mallet choice shows first: too light and it vanishes under its neighbours, too heavy and it drags behind the figure.
The middle size of the MV-B2PWR is made for that compromise. The head has enough to get the drumhead moving, without the mass that would slow the rebound.
What shaft thickness changes in the hand
0.870 in is genuinely thick for a mallet. The hand closes less and works more from the wrist than from the fingers. Over a parade of several hours, this full grip tires the hand less than a thin shaft you have to squeeze to control.
The trade-off is real and worth stating: a small hand will need a few rehearsals to get used to it. That is the price of a shaft that does not give way on the rim.
One drum, two mallets, one tone
A marching bass drum is played from both sides, one mallet per hand, on the same head or on both heads depending on the writing. Both mallets must therefore be the same size, or the drum responds differently depending on which hand plays.
It is obvious on paper, and yet it is the first thing to check when a line sounds uneven.
Specifications
| Drum sizes covered | 20 in and 22 in |
|---|---|
| Grip area | 0.870 in (22.1 mm) |
| Impact area | 0.890 in (22.6 mm) |
| Family | Power Bass series |
| Role in the line | Second voice, the pivot between attack and body |
What it is for
- Second drum of a marching bass drum line
- School band with 20 and 22 in drums
- Writing split between fast figures and sustained notes
- Indoor lines playing on the rim
- Standardizing a section's mallet inventory
Compare with other manufacturers
At this drum size, from other manufacturers:
| Manufacturer | Comparable model | What differs |
|---|---|---|
| Vic Firth | Corpsmaster MB2 | Different head and shaft geometry, thinner grip |
| Innovative Percussion | FBX-2 | Synthetic shaft, stiffer response |
| Yamaha | Field-Master, Medium size | Stated diameter range slightly offset |
| Promark | Marching mallets with screw-on heads | Head replaceable separately from the shaft |
Frequently asked questions
- Can one mallet size work for the whole bass line?
- It can, but the line loses its balance: the small drum gets too much mass and the big one not enough. Sections that do it do so for budget reasons, rarely by choice.
- Is the thick shaft suitable for high school students?
- Yes, with an adjustment period. The full grip is controlled from the wrist rather than the fingers, which is exactly the motion teachers want to build.
- Can these mallets handle rim clicks?
- That is the whole point of the series. The shaft is thickened precisely in the area that meets the metal.
- How do I know when a mallet needs replacing?
- When the shaft shows a dented groove or raised fibres where it contacts the rim. A crack running along the grain cannot be saved.
Avis clients
Is your second drum sounding late against the rest of the line?
Aucun avis pour le moment. Soyez le premier à partager votre expérience après votre achat.